Thermocrete Technical Data Sheet
| Bulk Density |
1800 kg/m3 |
| Cold Crushing Strength |
3800 psi |
| Maximum Service Temperature |
1600c |
| Average Thermal Conductivity |
0.7 w/ (m k) |
| Permanent Linear Change at 1,000c |
0.1 % |
| Acid Resistance Loss by Weight |
0 % |
| Abrasion Resistance |
High |
| Gas Permeability |
0% |
| Sweep Test Lost by Weight |
0.7% |
| Freeze/Thaw Weight Loss |
1.75% |
| Packaging |
50 lbs./plastic pail |
Thermocrete Ceramic Flue Sealant is an aluminum-silica base castable refractory tested by Warnock Hersey / Intertek Testing Services (#J99001572-231). CFS is produced to B.S. 4207 and tested by the Ceramics Institute/CERAM Research (NAMAS) to B.S. 1902. Thermocrete products are accepted for use in 82 countries worldwide.
American Standard for Testing and Materials (ASTM)
& Underwriters Laboratory (UL)
| ASTM C20- Apparent Porosity |
UL 1777 Section 4- Components |
| ASTM C113- Permanent linear change |
UL 1777 Section 13- General |
| ASTM C133- Cold Crushing Strength |
UL 1777 Section 22- Strength Tests |
| ASTM C24- Refractoriness PCE |
UL 1777 Section 23- Sweep Tests |
| ASTM C24 & ASTM C113- Max. Temp |
UL 1777 Sec 28- Resistance to Acids |
| UL 1777-Section 1- Scope |
UL 1777 Sec 29- Freeze/Thaw Cycle |
| UL 1777-Section 2- General |
UL 1777 Section 31- Marking |
| UL 1777-Section 3- Glossary |
UL 1777 Sec 32- Inst. & Maint. |
(CICS) Certificate Number 93158, to the requirements of American National Standards Institute (ANSI), and American Society for Quality Control (ASQC) Q 9002, EN-ISO-9002. (UK OPS)
Read the Thermocrete Ceramic Flue Sealant Technical Data Sheet as a PDF.
